Forged Eyebolt Kit for Sx 100 & Sx 300

EV MB100

New product

Forged Eyebolt Kit for Sx 100 & Sx 300

More details

Adasound Public Address Morley 9275 1266 www.adasound.com.au

Forged eyebolt attachment kit (set of three) for a single Sb121, Sb122PI, Sx100 or Sx300.

The Mb100 Eyebolt Attachment Kit is intended for very simple installations only, to suspend an individual Sx/Sb-Series loudspeaker in a near vertical orientation. A second, redundant insert point is provided in the top of the enclosure so a supplementary independent means of suspension can be attached when regulations specify. The enclosure can be positioned to angle downward slightly through the use of the pull-up point at the back of the enclosure.

Note that two top suspension cables should be used at all times to provide needed stability to the installation. Do not suspend Sx/Sb-Series enclosures face down from the ceiling using the Mb100 Eyebolt Attachment Kit. The M8 eyebolts are not rated for lifting loads at 90°, and such a configuration makes stabilization of the enclosure difficult. Instead, use the Mb200 Installation Kit for this and most other situations (see the Mb200 Installation Kit section).

  • Colour Black
  • Dimensions (H x W x D) M8 x 1.25 x 13 mm - eye diameter: 20 mm (3/4")
  • Material Drop forged steel, black nickel plated
  • Warranty 1 Year
  • Weight 0.2 Kg

7 other products in the same category:

Flying Hardware

Viewed Products